Do you know the application of hydrocyclone?

With the development of mineral processing technology, hydrocyclone is widely used in classifying industry, such as classifying, desliming, concentration, tailing filling.
1. Classifier: Hydrocyclone can be used in the first and second grinding, concentrate re-grinding, raw ore material desliming after concentrate, making dams and fillings. Because of it’s strength, hydrocyclone is widely used in any industry. It could be used after grinding to pre-classifier and classifier coarse and fine particles in a ball mill.
2. Desliming: Hydrocyclone could be used to desliming for many minerals and flotation reagent. It could be used to recovery concentrate and wipe off the coarse sand.
3. Concentration: Hydrocyclone could be used to concentrate slurry of low grade.
4. Demanding: There will be an impurity in the mining process, which will influence recovery rate, we should remove this impurity to reach our recovery rate. Different ore should use different hydrocyclone.
5. Tailings filling: Hydrocyclone could be used to classify particles with the different size and remove the useless particle.
We should choose hydrocyclone according to our demand. It could be used singly or used as a hydrocyclone sets. When it is used to classify tailing sand, coarse tailing could be used directly, while fine particle could be classified when they are a move in the water. Overflow water could be re-used, which reduce water consumption and cut cost and protecting the environment.

评论

发表评论

此博客中的热门博文

Guide of Gold Processing Equipment

图片
  The gold ore has a high mining value, the gold processing technologies are more complex, and the gold processing equipment used is not the same. At present, the common gold processing technologies mainly include the cyanide leaching method, flotation method and gravity separation method. That is, through the crushing, screening, grinding and classification, the ore is sent to the various  gold processing equipment  (leaching agitation tank, flotation cell, gravity separator) for separation. The concentrate obtained by the cyanide leaching, gravity separation and flotation are smelted by the chemical methods, and the product is finally made into the finished gold. Below, we will mainly explain the gold processing equipment used in the different stages of gold processing. One. Gold processing equipment used in the cyanide leaching method Cyanide leaching is one of the main gold processing methods, which can be divided into agitation cyanide leaching and percolation cyanide leaching. Am
阅读全文

Common Problems and Solutions of Jigging Process

图片
  Jigging process  has the advantages of good separation effect, large processing capacity, wide separation granularity range, less investment, low production cost, simple process system, etc., so it is widely used in the  gravity separation  process. As an important equipment in the gravity separation process, the operation of jigger is directly related to the product quality and the economic benefits of the concentrator. In case of abnormal problems of jig, which may affect the normal work of the subsequent process flow, it should be dealt with in time. Therefore, it is very important to understand the common problems of the jigging process and how to deal with them. Here are some common problems of jig in the jigging process and their solutions. 1. The screen plate is loose or broken During the jigging process, if the screen plate bounces with the pulsating water, the screws of the screen plate are loosened or dropped. If a column of water appears at a certain part of the bed during
阅读全文

Seven Common Froth Flotation Processes and Their Applicable Conditions

图片
Froth flotation   process is a kind of mineral processing technology that uses the flotation reagents to separate the ore according to the physical and chemical properties of the surface of the ore. The froth flotation process is to grind the mineral to the floating requirement, adjust the pulp concentration and add the flotation reagents, then inflate the air to make the mineralized froth separate. What are the common froth flotation processes? Do you know the application condition of the froth flotation process? 1. Preferential froth flotation process The preferential froth flotation process refers to float a kind of mineral first and inhibit another kind of mineral when the polymetallic mineral contains two or more kinds of useful components, and then activate and float other kinds of mineral. This process that recycles the useful minerals in turn is the preferential froth flotation process. Applicable condition: Generally, the preferential froth flotation process is
阅读全文