Gold Tailing Disposal Technology

Gold tailing disposal is important in the mining processing, while gold tailing dam is the important part in mining processing plant. Traditional gold tailing dam is a great threat to resident nearby. There are some ways to prevent the threat from gold tailing.
Technology of high-effect dehydration -- pressure filtration of tailing. Usually, tailing is thickened to 50% to 60% through thickener and then transfer to tailing dam by diaphragm pump. Water in tailing dam is recovered according to permeation. Soil and water nearly are polluted during the permeation. Gold tailing could be filtering to over 90% and transferred by belt or truck to the dry tailing pile. We can reduce pollution according.
Tailings paste storage. Gold tailings will thicken in paste thickener, because paste thicker has higher underflow concentration than common thickener which will increase the degree of safety. Currently, paste storage has two kinds: full tailing filling and tailing pile. In full tailing filling,  tailings are thickened in paste thickener and then transported to fill mine. This way dealing with tailings could solve not only the tailing pollution but also the threat from mine. Tailing pile method is that underflow from paste thickener is transported to the tailing reservoir to pile.
Different gold tailings have different ways to deal with. Apart from the two way we discussed above, tailings could also be re-processed by flotation and re-used as materials to produce construction materials.

评论

发表评论

此博客中的热门博文

Guide of Gold Processing Equipment

图片
  The gold ore has a high mining value, the gold processing technologies are more complex, and the gold processing equipment used is not the same. At present, the common gold processing technologies mainly include the cyanide leaching method, flotation method and gravity separation method. That is, through the crushing, screening, grinding and classification, the ore is sent to the various  gold processing equipment  (leaching agitation tank, flotation cell, gravity separator) for separation. The concentrate obtained by the cyanide leaching, gravity separation and flotation are smelted by the chemical methods, and the product is finally made into the finished gold. Below, we will mainly explain the gold processing equipment used in the different stages of gold processing. One. Gold processing equipment used in the cyanide leaching method Cyanide leaching is one of the main gold processing methods, which can be divided into agitation cyanide leaching and percolation cyanide leaching. Am
阅读全文

Common Problems and Solutions of Jigging Process

图片
  Jigging process  has the advantages of good separation effect, large processing capacity, wide separation granularity range, less investment, low production cost, simple process system, etc., so it is widely used in the  gravity separation  process. As an important equipment in the gravity separation process, the operation of jigger is directly related to the product quality and the economic benefits of the concentrator. In case of abnormal problems of jig, which may affect the normal work of the subsequent process flow, it should be dealt with in time. Therefore, it is very important to understand the common problems of the jigging process and how to deal with them. Here are some common problems of jig in the jigging process and their solutions. 1. The screen plate is loose or broken During the jigging process, if the screen plate bounces with the pulsating water, the screws of the screen plate are loosened or dropped. If a column of water appears at a certain part of the bed during
阅读全文

Seven Common Froth Flotation Processes and Their Applicable Conditions

图片
Froth flotation   process is a kind of mineral processing technology that uses the flotation reagents to separate the ore according to the physical and chemical properties of the surface of the ore. The froth flotation process is to grind the mineral to the floating requirement, adjust the pulp concentration and add the flotation reagents, then inflate the air to make the mineralized froth separate. What are the common froth flotation processes? Do you know the application condition of the froth flotation process? 1. Preferential froth flotation process The preferential froth flotation process refers to float a kind of mineral first and inhibit another kind of mineral when the polymetallic mineral contains two or more kinds of useful components, and then activate and float other kinds of mineral. This process that recycles the useful minerals in turn is the preferential froth flotation process. Applicable condition: Generally, the preferential froth flotation process is
阅读全文