Seven Common Froth Flotation Processes and Their Applicable Conditions

Froth flotation process is a kind of mineral processing technology that uses the flotation reagents to separate the ore according to the physical and chemical properties of the surface of the ore. The froth flotation process is to grind the mineral to the floating requirement, adjust the pulp concentration and add the flotation reagents, then inflate the air to make the mineralized froth separate.
What are the common froth flotation processes? Do you know the application condition of the froth flotation process?
1. Preferential froth flotation process
The preferential froth flotation process refers to float a kind of mineral first and inhibit another kind of mineral when the polymetallic mineral contains two or more kinds of useful components, and then activate and float other kinds of mineral. This process that recycles the useful minerals in turn is the preferential froth flotation process.
Applicable condition:
Generally, the preferential froth flotation process is applied to the mineral that the useful minerals have coarse disseminated grain size, the content of useful minerals in the ore is higher or the floatability of various useful minerals is different but the content is similar.
Characteristics:
The process condition of the preferential froth flotation process is easy to control, the production index is high and stable. However, compared with the bulk froth flotation process, the preferential froth flotation process has a longer flotation time, and needs a large number of flotation cells. Besides, the grinding requirements in the early flotation are high, which increases the grinding cost. In addition, the amount of inhibitors and activators in the preferential froth flotation is large, so the production cost is higher.
Pakistan-1500tpd-copper-mineral-processing-project
2. Bulk froth flotation process
The bulk froth flotation process is to separate the various useful minerals together when the ore contains two or more kinds of mineral, and then separated one after another.
Applicable condition:
Bulk froth flotation process can be used for polymetallic ore with a lower grade or the useful mineral is assembled as the aggregate. For example, when the wolframite and scheelite exist in the form of symbiotic ore, the paragenic ore has a lower grade, and the useful minerals have a close symbiotic relationship, the bulk froth flotation process is mostly adopted.
Characteristics:
Under the coarse grinding, a large amount of gangues can be discarded after the flotation in the bulk froth flotation process, which reduces the amount of gangue entering the subsequent operations and the cost of subsequent grinding operations. However, there are collectors on the surface of mixed concentrates and the excess collector remains on the slurry, which increases the difficulty of the next separation operation.
flotation-cell
3. Partial bulk-preferential froth flotation process
The bulk-preferential froth flotation process is a new froth flotation method based on preferential froth flotation and bulk froth flotation. It is to float some kinds of useful minerals, and inhibit other minerals, then activate and float those inhibited other useful minerals, and float the mixed concentrates again.
Applicable condition:
In general, there are several useful minerals with similar flotability in the ore, or the flotability is different. For example, when the ore contains copper-molybdenum, copper-lead, copper-zinc, lead-zinc mineral and one of them has a low grade, partial bulk-preferential froth flotation process is usually adopted.
4. Iso-flotability flotation process
The flotation order of iso-flotability flotation process is not completely divided according to the types of mineral. According to the same or similar floatability of the mineral, the recovered mineral is divided into easy-to-float and difficult-to-float parts, and then float them from easiness to difficulty.
Applicable condition:
Iso-flotability flotation process is suitable for treating the complex polymetallic sulfide ores with easy-to-float and difficult-to-float parts. For example, in a sulfide ore, the useful minerals are galena, sphalerite and pyrite, among which, sphalerite has two kinds of minerals which are easy to float and difficult to float, so the iso-flotability flotation process can be used.
Characteristics:
Compared with the bulk froth flotation process, the amount of reagent used in the iso-flotability flotation process is less, which not only eliminates the influence of excess reagent on the flotation, but also improves the separation index. However, the equipment used in the iso-flotability flotation process is larger than the bulk froth flotation process.
flotation-pulp
5. Asynchronous flotation process
Asynchronous flotation process is a new type of flotation process that developed based on iso-flotability flotation process, which is determined by the difference of ore properties and the product requirements.
Applicable condition:
The asynchronous flotation process is suitable for the flotation of the ore that has the majority of lead and less sulfur. For example: In a lead ore concentrator, the lead is the main carrier mineral of silver, the fine lead can be separated first without inhibitor, then the fine lead-silver and coarse lead-silver, which can ensure the higher recovery rate of lead and silver.
6. Flash flotation process
Flash flotation process is a process that adds the single-trough flotation in the grinding circuit. Before the conventional flotation process, the flash flotation process can be used to pre-float a part of qualified concentrate, which reduces the loss caused by overgrinding of useful minerals. In other words, the useful minerals that have been liberated in the grinding circuit are quickly floated as the concentrate, which avoids them from re-entering the grinding circuit and produce overgrinding mud.
Applicable condition:
Flash flotation process is mainly suitable for non-ferrous metal sulfide ore containing metals with uneven disseminated grain size.
Characteristics:
The flash flotation process can separate the liberated coarse useful mineral in advance, thus reducing the overgrinding of useful minerals, and reducing the loss of useful minerals in the slime, improving the recovery rate of the useful minerals.
7. Instant flotation process
The instant flotation process is to separate the part of minerals with fast flotation speed first in a short flotation time according to the different particles of the target mineral, especially the difference of the flotation speed between the liberated mineral and the concomitant mineral.
Applicable condition:
The instant flotation process is especially suitable for the ore with uneven disseminated grain size and the coarse concentrate or medium ore need to be reground.
Characteristics:
The route into concentrate can be shortened, which realizes early and fast recovery.
Above are seven flotation processes. In the mineral process technologies, the flotation process is difficult and complicated, so please carry on the ore dressing experiment to customized the suitable flotation process.

评论

发表评论

此博客中的热门博文

Common Problems and Solutions of Jigging Process

图片
  Jigging process  has the advantages of good separation effect, large processing capacity, wide separation granularity range, less investment, low production cost, simple process system, etc., so it is widely used in the  gravity separation  process. As an important equipment in the gravity separation process, the operation of jigger is directly related to the product quality and the economic benefits of the concentrator. In case of abnormal problems of jig, which may affect the normal work of the subsequent process flow, it should be dealt with in time. Therefore, it is very important to understand the common problems of the jigging process and how to deal with them. Here are some common problems of jig in the jigging process and their solutions. 1. The screen plate is loose or broken During the jigging process, if the screen plate bounces with the pulsating water, the screws of the screen plate are loosened or dropped. If a column of water appears at a certain par...
阅读全文

What are the Graphite Mining Processes?

图片
As the expand of graphite application field, the industry has a higher and higher requirement for the graphite, which encourages the graphite graphite mining to absorb the traditional  graphite beneficiation process  and keep continuous innovation at the same time. At present, the graphite beneficiation processes are mainly gravity separation process, froth flotation process, electric separation process and the combination process. And froth flotation process is the main  graphite mining  process. Generally, 90%-97% grade of graphite concentrate can be obtained after the graphite flotation process. For the different graphite ore properties, the graphite beneficiation processes are also different. 1.   Massive crystalline graphite mining For the massive crystalline graphite, because of the high-grade carbon in itself, finer particle sizes and the smaller reserves, we can adopt the traditional crushing and hand picking technology to take advantage of it. ...
阅读全文